PIG® Drive-Over Build-A-Berm® Barrier

Provides permanent or semi-permanent containment in high-traffic areas on concrete, asphalt or most sealed surfaces. Create any configuration by combining with other Build-A-Berm components; ends overlap and can be sealed together for liquid-proof containment
Constructed of 40-ounce, vinyl-coated fabric with an open-cell foam core; berm compresses to approximately 6mm when driven over; springs back to shape when vehicles pass
Durable enough to withstand indoor or outdoor traffic from trucks, loaded tow motors and other heavy vehicles with sufficient ground clearance
Pre-drilled aluminium mounting strips with steel anchors secure berm to most surfaces; remove anchors to reposition, then seal with caulking (not included)
Vent allows built-up air pressure caused by heavy vehicles driving over connected heavy-duty sections to escape without rupturing the seams of your barrier
Sealed, 90-degree wall end sits flush against the floor and a wall, curb, etc. Helps you create professional containment areas without fabrication or using excessive caulk

Item Number	Product Name	Dimensions	Details	Unit
PLR283	PIG® Drive-Over Build-A-Berm® Barrier	14cm W x 366cm L x 5cm H	-30°C (-22°F) to 71°C (160°F) Temperature Limit	1/Box
PLR109	Wall End for PIG® Drive-Over Build-A-Berm® Barrier	14cm W x 8cm L x 5cm H	-30°C (-22°F) to 71°C (160°F) Temperature Limit	2/Box
PLR108	Vented Corner for PIG® Drive-Over Build-A-Berm® Barrier	14cm W x 18.5cm L x 5cm H	-30°C (-22°F) to 71°C (160°F) Temperature Limit	2/Box